SPC Storage Performance Council Password Help | Login | Site Map | Contact Us 

Defining, administering, and promoting industry-standard, vendor-neutral benchmarks to characterize the performance of storage products.

Home > SPC Results Overview > Withdrawn SPC-1 Results

Withdrawn SPC-1 and SPC-1/E Results

Withdrawn Status

An SPC benchmark result may be withdrawn voluntarily by the Test Sponsor or as directed by the SPC. Each withdrawn SPC benchmark will be placed in one of the following three categories:

  • Withdrawn 1: The SPC benchmark result was voluntarily withdrawn by the Test Sponsor without any compliance issues raised concerning the SPC benchmark result. This action is typically taken when an existing SPC benchmark result references a product that is no longer supported or has been superceded by a more recent model/version.

  • Withdrawn 2: The SPC benchmark result was withdrawn by the Test Sponsor after one or more compliance issues were raised during the SPC Peer Review. The SPC benchmark result was withdrawn prior to resolution of the compliance issue(s).

  • Withdrawn 3: The SPC benchmark result was withdrawn by the SPC after being ruled non-compliant with the appropriate SPC specification.

withdrawn SPC benchmark result will remain on the SPC Benchmark Results website pages for 120 days from the date of withdrawal and may be publicly referenced during that period as a withdrawn SPC benchmark result. At the end of the 120-day period, the withdrawn SPC benchmark result will be removed from the SPC Benchmark Results website pages and is no longer considered a SPC benchmark result and should not be referenced as such.SPC-2C Results provide a source of comparative storage performance information that is objective, relevant, and verifiable. That information will provide value throughout the storage product lifecycle, which includes development of product requirements, product implementation, performance tuning, capacity planning, market positioning, and purchase evaluations.

Listed below is a table of all current Withdrawn SPC-1 and SPC-1/E Results.

 

 

(updated: 22 June 2016)

 

Withdrawn SPC-1 Results

Test Sponsor SPC-1, SPC-1/E Submission Identifier -
Tested Storage Product (TSP)
SPC-1
Version
Storage Device Category
Active/Inactive/Withdrawn Status
Documentation Submission Date, and
Revision Status
Withdrawal Category
DataCore Software Corporation A00167
Datacore Parallel Server

V1.14
HDD and SSD storage devices
Withdrawn SPC-1 Result
Executive Summary
Full Disclosure Report

Submitted: 26 February 2016
Revised: 3 March 2016
WITHDRAWN: 16 June 2016

Withdrawn 3


 Links to other SPC Results pages: